PES-2607 Smart RS422 / RS485 Board for PHPoC Arduino Shield 2

  • $48.00


The PHPoC PES-2607 RS422/RS485 Board is a Smart Expansion Board for PHPoC P4S-347 or P4S-348 V2 Arduino Shields designed to quickly enable as well as easily expand the capability of RS422/RS485 communication functions on Arduino Uno and Mega microcontrollers.

After stacking on a PHPoC P4S-347 or P4S-348 V2 Shield with an Arduino Uno or Mega, this Smart RS422/RS485 Board contains the necessary hardware and firmware to communicate with RS422/RS485 devices.

Two different types of terminal blocks are available, based on the direction of the terminal screws. S-type can be screwed from the side, convenient when the multiple boards are stacked. T-type is screwed from the top of the board. The wire termination blocks are on the side of the board in both models.

PHPoC Smart Expansion Boards for ArduinoSmart Expansion boards for PHPoC P4S-347 or P4S-348 V2 Shields provide the additional hardware and firmware to boost Arduino Uno and Mega microcontrollers with advanced capabilities (e.g. control high-voltage devices, control/monitor motors with high accuracy).

They communicate with Arduino Uno/Mega via a defined set of commands and need to be stacked above a PHPoC [WiFi] Shield 2 (P4S-347 V2 or P4S-348 V2), firmware version of 1.4.0 or above, in order to interface with Arduino.

Specifications

  • 1x6 5mm Pitch Terminal Block Interface
  • 1 X RS422 or RS485 Baud-rate: 1200bps ~ 115200bps
  • DIP Switch to Set Address (ID)
  • TxDE Flow Control Option
  • Inter Frame Delimiter Function
  • Inter Frame Gap Function
  • Transmission Delay Option
  • Sending Break Signal Ability

Delivery is stock to 2 weeks, if the item is out of stock, please contact us for availability. 

Documentation & Resources

   PES-2607 Smart RS422 / RS485 Board for PHPoC Arduino Shield 2 Web Page