The PHPoC PES-2607 RS422/RS485 Board is a Smart Expansion Board for PHPoC P4S-347 or P4S-348 V2 Arduino Shields designed to quickly enable as well as easily expand the capability of RS422/RS485 communication functions on Arduino Uno and Mega microcontrollers.
After stacking on a PHPoC P4S-347 or P4S-348 V2 Shield with an Arduino Uno or Mega, this Smart RS422/RS485 Board contains the necessary hardware and firmware to communicate with RS422/RS485 devices.
Two different types of terminal blocks are available, based on the direction of the terminal screws. S-type can be screwed from the side, convenient when the multiple boards are stacked. T-type is screwed from the top of the board. The wire termination blocks are on the side of the board in both models.
Smart Expansion boards for PHPoC P4S-347 or P4S-348 V2 Shields provide the additional hardware and firmware to boost Arduino Uno and Mega microcontrollers with advanced capabilities (e.g. control high-voltage devices, control/monitor motors with high accuracy).
They communicate with Arduino Uno/Mega via a defined set of commands and need to be stacked above a PHPoC [WiFi] Shield 2 (P4S-347 V2 or P4S-348 V2), firmware version of 1.4.0 or above, in order to interface with Arduino.
- 1x6 5mm Pitch Terminal Block Interface
- 1 X RS422 or RS485 Baud-rate: 1200bps ~ 115200bps
- DIP Switch to Set Address (ID)
- TxDE Flow Control Option
- Inter Frame Delimiter Function
- Inter Frame Gap Function
- Transmission Delay Option
- Sending Break Signal Ability
Delivery is stock to 2 weeks, if the item is out of stock, please contact us for availability.
Documentation & Resources
PES-2607 Smart RS422 / RS485 Board for PHPoC Arduino Shield 2 Web Page