Skip to content

Ships from Colorado, USA • $5.95 flat-rate US shipping per order (any number of items) • FREE shipping over $75!

Using the Aroma AT-01A Clip-On Tuner in Chromatic Mode: How to Tune a Cello or Viola

Using the Aroma AT-01A Clip-On Tuner in Chromatic Mode: How to Tune a Cello or Viola - Envistia Mall

The Aroma AT-01A clip-on tuner has presets that show the string number and note for guitar, bass, violin and ukulele. But it is also a fully chromatic tuner, which means it can tune any stringed instrument, including the cello and viola. This application note explains how Chromatic mode works and walks you through tuning a cello or viola, string by string.

📡 What Is Chromatic Mode?

In a preset mode such as Guitar or Violin, the tuner already knows which strings to expect, so it shows a string number along with the note. Chromatic mode has no preset. It listens to whatever note you play, finds the nearest musical note, and shows you how far above or below that note you are.

Because it works with any note, Chromatic mode is the right choice for instruments that are not on the preset list. The AT-01A detects pitches from A0 (27.5 Hz) to C8 (4186 Hz), which comfortably covers every open string on a cello and viola. It uses the standard concert pitch reference of A = 440 Hz.

In Chromatic mode the display shows:

  • The note name closest to the pitch you played
  • A meter showing whether the note is flat (too low), sharp (too high) or in tune
  • The backlight color: blue when the note is out of tune, green when it is in tune

Chromatic mode does not show a string number. You choose which string to tune, so it helps to know the target notes. They are listed below.

🔧 Selecting Chromatic Mode

  1. Press and hold the button to turn the tuner on.
  2. Press and release the button to cycle through the modes: (C)hromatic, (G)uitar, (B)ass, (V)iolin and (U)kulele.
  3. Stop when the display shows C for Chromatic.

The tuner turns itself off after 3 minutes if it does not detect a signal. To turn it off manually, press and hold the button.

📊 Open-String Target Notes

Cellos and violas are both tuned in perfect fifths, using the same four note names: C, G, D and A. The cello sounds one octave lower than the viola. All of these notes are natural notes (no sharps or flats), so while tuning you only need to look for C, G, D or A on the display.

Cello

String Note Frequency
1st (highest) A3 220.00 Hz
2nd D3 146.83 Hz
3rd G2 98.00 Hz
4th (lowest) C2 65.41 Hz

Viola

String Note Frequency
1st (highest) A4 440.00 Hz
2nd D4 293.66 Hz
3rd G3 196.00 Hz
4th (lowest) C3 130.81 Hz

The viola's G, D and A strings sound the same pitches as the violin's G, D and A strings, so the Violin preset can read those three. The viola's low C is not on the violin, so Chromatic mode is simpler: you can tune all four strings without switching modes.

📋 How to Read the Display

  • Display shows your target note, meter centered, backlight green: the string is in tune.
  • Display shows your target note, backlight blue: the meter shows whether the string is flat or sharp. Flat means tighten the string slightly. Sharp means loosen it slightly.
  • Display shows a different note than your target: the string is more than a half step away. The meter is now measuring against that other note, not yours. For example, if you are tuning the A string and the tuner shows G♯ with the meter on the sharp side, your string is between G♯ and A. It needs to be raised to reach A.

Always tune to the note you want, and let the display's note name tell you which direction to go.

🚀 How to Tune a Cello

  1. Select Chromatic mode as described above.
  2. Clip the tuner directly onto the cello's bridge. The bridge transmits the string vibrations best, which is especially important for the low C string. Place the clip on the top edge of the bridge, away from the strings, and rotate the display so you can read it from your playing position. See the bridge care notes below.
  3. Start with the A string. Play the open string with a steady, medium-light bow stroke, or pluck it firmly, and watch the display.
  4. Adjust until the meter is centered and the backlight turns green. Make small adjustments with the fine tuner if your cello has one. Use the peg only for larger corrections.
  5. Tune the D string, then the G string, then the C string the same way.
  6. Go back and recheck the A string. Changing the tension on one string can slightly shift the others.
  7. Remove the tuner before you play.

The low C string vibrates slowly, so the tuner may take a moment to settle. Play a long, steady note and wait a second or two for a stable reading.

🚀 How to Tune a Viola

  1. Select Chromatic mode.
  2. Clip the tuner onto the viola's scroll or pegbox, or the edge of the headstock. Rotate the display to face you. If the readings are weak, you can clip it onto the bridge instead, using the same care described below.
  3. Tune the A string first to A (440 Hz) by bowing it steadily or plucking it.
  4. Tune the D string, then the G string, then the C string.
  5. Recheck the A string at the end.
  6. Remove the tuner before you play.

💡 Tuning Tips and Cautions

  • Handle the bridge gently. The bridge is held in place by string tension, not glue. Attach and remove the clip slowly, without pulling or twisting, and keep the clip clear of the strings. Afterward, check that the bridge is still standing straight. If it has tilted, ask your teacher or a luthier to adjust it.
  • Tune up to the note. If a string is sharp, loosen it below the note first, then bring it up to pitch. This helps the peg hold and keeps the string from slipping flat.
  • Turn pegs slowly, pushing them gently into the pegbox as you turn so they stay seated.
  • Do not overtighten. The A string is under the most tension and is the most likely to break. If the display is far from your target note, stop and check that you are tuning the correct string.
  • Check your octave. The display shows note names, so a string tuned an octave off could still look "in tune." Use the frequencies in the tables to confirm you are in the right range.
  • New strings go flat often. New strings stretch for several days, so expect to retune frequently.
  • Standard pitch only. The AT-01A uses A = 440 Hz and is not adjustable, so it is not suited to alternate reference pitches.

🛠️ Troubleshooting

Problem What to try
The display jumps between notes Lightly touch the other strings with your fingers to stop sympathetic vibration, then play the open string again.
No reading appears Make sure the clip is firmly attached and the tuner is not in a preset mode. Play the string more firmly and let it sound for a second or two.
The reading is weak or slow on the low C string On a cello, clip the tuner onto the bridge, which transmits vibration best. Then play a long, steady note and wait a second or two.
The display shows the wrong note name You may be far from the target. Tune toward the target note, then recheck.
The tuner turned off It powers down automatically after 3 minutes without a signal. Press and hold the button to turn it back on.

🏪 Where to Buy

The Aroma AT-01A Clip-On Tuner is available at envistiamall.com.

  • Fast Free US Shipping
  • Hassle-Free Returns
  • Responsive Customer Support

This application note is provided for informational purposes by Envistia Mall. Instrument tuning practices vary, and string tension, peg condition and instrument setup differ between instruments. Envistia Mall is not responsible for damage resulting from tuning an instrument. If you are unsure, consult a qualified teacher or luthier. Visit envistiamall.com for more products and support.

Share this guide:
in

🛒 Related Products

Find the components mentioned in this guide in our store.

Browse Products →