12V (6.3-22V) In To 3.3V Out 3A 10W DC-DC Waterproof Converter Module with Flying Leads

This miniature waterproof DC-DC step-down converter module converts a 6.3V to 22V (nominally 12V) DC input to 3.3V DC output at up to 3A current (10W maximum). It features flying lead inputs and outputs for easy connection to your circuit.  

Specifications:

• Epoxy sealed plastic waterproof housing (IP68)
• Lightweight, compact, convenient to use and transport
• Non-isolated
• Protection: Over-current, over-heating, short-circuit, reverse polarity
• Auto recovery
• Input voltage: DC 12V nominal, will operate on any input voltage from 6.3V to 22V DC
• Maximum input current at 3A output: Approximately 0.83A at 12V input, 0.67A at 15V input
• Output voltage: 3.3V
• Maximum output current: 3A
• Maximum Output Power: 10W
• Efficiency: Typically 95%
• Voltage regulation: ±1%
• Load regulation: ± 2%
• Ripple (Full load test): < 150mV
• No-load current: < 100mA
• Operating temperature: -40C - +80C
• Size (L x W x H): 46 * 27 * 14 mm / 1.81" x 1.04" x 0.55" (Length including mounting tabs is 64mm / 2.5")
• Weight: 36g / 1.3oz
• Waterproof rating: IP68
• Input and output wire length: 13.5cm / 5.3" (approx)

Operating Notes:

As with any DC-DC converter, the input DC power supply powering this converter must be capable of providing the maximum power drawn by your load. If the input supply is not capable of providing the power, the converter will fold back the output voltage as necessary. Example: If your load draws 3A at 3.3V (10W), and the input supply is only capable of providing 12V at 0.5A (6W), the maximum output voltage the converter will deliver is 2V (6W/3A).

• 1X 6.3V-22V Input to 3.3V Output 3A 10W Waterproof DC-DC Step Down Converter