TL072CP 30V Dual Low-Noise JFET Operational Amplifier IC (8-Pin DIP)

📋 Overview

The TL072CP is a dual-channel, JFET-input operational amplifier from Texas Instruments — the two-amp sibling of the industry-standard TL071. It packs two independent, low-noise op amps into a single 8-pin DIP, so you get two amplifier stages while using half the board space and half the parts count of two single op amps. Rated for a 30V maximum supply with a 13V/µs slew rate, low input offset voltage, and low noise, it's a dependable choice for audio circuits, sensor signal conditioning, and general-purpose analog designs where you need more than one amplifier stage.

New to op amps? Think of the TL072CP as two TL071-style signal "helpers" built into one chip — handy for stereo audio (left/right channels), a two-stage filter, or any circuit that needs a matched pair of amplifiers sharing the same power supply.

⭐ Key Features

• Dual channel — two independent op amps in one 8-pin package
• 30V maximum supply voltage — higher headroom than many general-purpose op amps
• 13V/µs typical slew rate for fast-changing signals
• 3MHz gain-bandwidth product
• Low input offset voltage for accurate, stable readings
• Low input noise — ideal for audio and precision signal work
• Output short-circuit protection built in
• Industry-standard, second-source-friendly pinout — easy to substitute in existing designs
• Common, easy-to-solder 8-pin DIP package for through-hole prototyping

🎯 Applications

• Stereo audio circuits: preamps, mixers, and tone controls where matched left/right channels benefit from sharing one chip
• Multi-stage filters: build a two-pole active filter (e.g., a buffer stage plus a filter stage) using both amplifiers on one IC
• Sensor signal conditioning: amplify and buffer two separate sensor signals, or use one channel for gain and the other for buffering
• Instrumentation and test equipment: dual buffer or comparator stages in measurement gear
• Higher-voltage analog stages: the 30V supply rating gives extra headroom for designs running on ±12V to ±15V rails
• General-purpose amplification: inverting/non-inverting amplifier stages, voltage followers, and dual comparators in hobbyist and educational projects

📌 Pin Diagram (8-Pin DIP)

• Pins 2 & 3 (1IN-, 1IN+): Inverting and non-inverting inputs, amplifier 1
• Pin 1 (1OUT): Output, amplifier 1
• Pins 5 & 6 (2IN+, 2IN-): Non-inverting and inverting inputs, amplifier 2
• Pin 7 (2OUT): Output, amplifier 2
• Pins 4 & 8 (V-, V+): Power supply connections (shared by both amplifiers)

📊 Specifications

Both amplifiers on the TL072CP share the same power supply pins and specifications. For complete electrical characteristics, absolute maximum ratings, and application circuits, see the full datasheet linked below.

🛒 You May Also Need

• 8-Pin DIP IC Sockets

📄 Documentation & Resources

• TL072CP Datasheet (PDF) — full electrical specifications, absolute maximum ratings, package drawings, and reference circuits (shared datasheet with the TL071 family)
• TL072CP Official Part Page (TI.com) — manufacturer part details, pricing tiers, and quality/reliability data

Sold and supported by Envistia Mall. This product ships from our US warehouse, so you get it fast without overseas shipping delays. Datasheets and reference links above are provided by the manufacturer for technical reference; Envistia LLC (dba Envistia Mall) is not responsible for circuit design outcomes or misuse of this component. Always observe proper ESD precautions and stay within the rated 30V maximum supply voltage when handling and using this device. Specifications are subject to change by the manufacturer without notice — always confirm critical parameters against the current datasheet before use in your design.