New to the RP2040 16MB USB-C development board? This beginner-friendly guide covers flashing firmware, pinout, GPIO wiring, and a MicroPython example to light up the onboard RGB LED — everything...
Read guide →
Learn to set up your UNO R4-compatible WiFi board — Renesas RA4M1 + ESP32-S3 chipset with Wi-Fi, Bluetooth 5, USB-C, 12x8 LED matrix, 12-bit DAC, op-amp, Qwiic I2C, and CAN...
Read guide →
📋 Overview ⚠️ NOTE: This WeMos-compatible NodeMCU WiFi Development board features the same specifications as the standard LoLin NodeMCU V3 board, with the following differences: ✅ The size is reduced to...
Read guide →
Learn how to set up and program the NodeMCU V3 ESP8266 WiFi IoT development board. This user guide covers CH340G driver installation, Arduino IDE configuration, GPIO pinout mapping, sample WiFi...
Read guide →
Learn how to set up and program the WeMos D1 R2 ESP8266 WiFi development board. This user guide covers CH340 driver installation, Arduino IDE configuration, GPIO pinout mapping, sample WiFi...
Read guide →
Get started with the D1 Mini ESP8266 WiFi microcontroller. This user guide covers everything you need — technical specs, pinout reference, CH340G driver installation, Arduino IDE setup, and working code...
Read guide →
Get started with the D1 Mini Pro ESP8266 WiFi microcontroller. This user guide covers technical specs, full pinout reference, CP2104 driver installation, Arduino IDE setup, external antenna configuration, LiPo battery...
Read guide →
