CHIPSEN BoT-TMA50DU Bluetooth v5.3 BLE Class1 (+20dBm) DIP Slave/Master/Multicon 1:8 Module w/ U.FL Antenna

Name: CHIPSEN BoT-TMA50DU Bluetooth v5.3 BLE Class1 (+20dBm) DIP Slave/Master/Multicon 1:8 Module w/ U.FL Antenna
Brand: CHIPSEN
SKU: EM-COMMS-0036
Price: 23.39 USD
Availability: OutOfStock

$23.39

Sale Sold out

Quantity

Please CONTACT US for OEM and Quantity Discounts.

The CHIPSEN BoT-TMA50DU module features a BoT-TMA50 SMD Master/Slave/Multicon Long-Distance Bluetooth BLE module mounted on a DIP carrier with 2.54mm header pins and a U.FL antenna connector (antenna is not included). This module can be installed in through-hole PCBs, mounted in 2.54mm sockets for easy removal, or can be plugged into the CHIPSEN BoT-USB-TB Test Board to easily connect the module to a PC's USB port.

The electrical and performance specifications for this module are the same as the BoT-TMA50. See the BoT-TMA50 OEM Long-Distance Bluetooth module product page for full specifications.

CHIPSEN BoT-TMA50DU Class 1 Bluetooth Module DIP Mount Dimensions

BoT-TMA50DU Features

Bluetooth Processor: BoT-TMA50 (Master, Slave or Multicon Mode)
BT Version: Bluetooth Low Energy (BLE) V5 .3
Built in Chip Antenna + U.FL Antenna Connector Bluetooth Smart (Bluetooth Low Energy) Module
ARM® Cortex® M4 32 bit processor with FPU, 64 MHz
Memory: 512 kB Flash / 128 kB RAM
RF Output Power: up to 20 dBm E.I.R.
RF Receive Sensitivity: -98.0 dBm w/ Dirty Tx enabled, 1Mbps Bluetooth Low Energy mode
On chip LDO system
Temperature Sensor on chip
UART (CTS/RTS) with EasyDMA, SPI, and I2C data interfaces
12 Bit 200 ksps ADC with 7 configurable channels with programmable gain
Size: 24 mm x 22 mm x 12.2 mm (including pins)
Operating Voltage: 2.7 V to 3.6V
Operating Temperature: -40℃ to +85℃ (FCC, JAPAN, KC) / -20℃ to +85℃ (CE Only)
Certifications: SIG, KC (including wireless EMC), FCC, CE, TELEC

BoT-TMA50DU Header Pins and Pinout

The BoT-TMA50DU is supplied with unsoldered 2.54mm header pins. The board can be wired into the circuit through the connection pads, or the header pins can be soldered in to plug the board into another PCB, plugged into a BoT-USB-TB Test Board.