Mini Rocker Switch - Black KCD117S SPST ON/OFF, 2-Pin, 125VAC/6A, Miniature 15mm × 10mm (½" × ⅜") - 2/5/10 Pack
Mini Rocker Switch - Black KCD117S SPST ON/OFF, 2-Pin, 125VAC/6A, Miniature 15mm × 10mm (½" × ⅜") - 2/5/10 Pack
Couldn't load pickup availability
⚠️ MINIATURE SWITCH — PLEASE CHECK SIZE BEFORE ORDERING
This switch measures just 15mm × 10mm (approximately ½" × ⅜") — about the size of a fingernail. It requires a 13.5mm × 9mm (0.53" × 0.35") panel cutout. Please review the dimensional drawing in the photo gallery to confirm it fits your application.
Need a reliable ON/OFF switch that fits in tight spaces? The KCD117S Miniature Rocker Switch packs full-size electrical performance — 6A at 125VAC / 3A at 250VAC — into a compact snap-in package that's barely half an inch long. Its SPST (Single Pole, Single Throw) 2-pin design makes wiring simple: two terminals, one circuit, on or off.
The snap-in mounting design presses directly into a rectangular panel cutout (13.5mm × 9mm) with no screws or hardware needed — just cut the hole, push the switch in, and the retention clips hold it securely in place.
⚡ Key Features
- Miniature form factor: Just 15mm × 10mm face (½" × ⅜") — fits where standard rocker switches can't.
- Full-size electrical rating: 125VAC / 6A and 250VAC / 3A — handles real loads despite its small size.
- Simple SPST operation: 2-pin ON/OFF — one circuit, no complicated wiring.
- Snap-in panel mount: Press-fit into a 13.5mm × 9mm rectangular cutout. No screws or mounting hardware required.
- Tactile rocker action: Positive click feel confirms switching state.
- Multi-pack value: Available in 2-pack, 5-pack, and 10-pack quantities.
📐 Specifications
- Switch type: SPST (Single Pole, Single Throw) — ON/OFF
- Terminals: 2-pin solder lug
- Electrical rating: 125VAC / 6A — 250VAC / 3A
- Overall dimensions: 14.8 × 10.3 × 16.5mm (0.58" × 0.40" × 0.65") L × W × H
- Panel cutout: 13.5 × 9mm (0.53" × 0.35")
- Model: KCD117S
- Color: Black
- Material: Plastic body, metal contacts
- Mounting: Snap-in (press-fit retention clips)
🎯 Perfect For
- Small electronics enclosures and project boxes
- Arduino, ESP32, and Raspberry Pi project housings
- LED strip and lighting control panels
- Automotive and marine accessory switches
- DIY battery packs and portable power devices
- RC vehicles and hobby electronics
- Control panels and instrument enclosures
- Any application where space is limited and a standard rocker switch is too large
📦 Package Contents
- 2, 5, or 10 × KCD117S Black Mini Rocker Switch (select quantity above)
📏 SIZE REMINDER
This is a miniature switch — approximately ½ inch long by ⅜ inch wide (15mm × 10mm). If you need a larger rocker switch, please check our full switch collection for standard-size options.
Share

great rocker switch for DIY electronics projects
Perfect for my intended usage.
Worked perfectly to repair my VILTROX L116T video light.
I spent some time trying to find this size switch. I had to replace a bad switch for solar powered LED lights in a deck umbrella. It takes a smaller than usual size. Then i finally found these tiny switches. I soldered one to the wires and it fit perfectly in the hole. Now my umbrella lights work perfectly.