UHF Adapters, Connectors & Jumper Cables

UHF Adapters, Connectors & Jumper Cables

Our UHF adapters and connectors let you join UHF-style PL259 (male) and SO239 (female) connectors to other RF connector types, including BNC, SMA, and N-Type. Whether you're adapting a UHF-terminated antenna cable to a BNC radio port, stepping down to SMA for a handheld transceiver, or mounting a bulkhead feedthrough panel connector, these adapters provide a secure, low-loss RF connection.

Examples of What's Included

  • PL259 to SMA Adapters — connects a UHF male cable end to SMA equipment
  • PL259 to SO239 Right-Angle Adapter — 90° connection for tight spacing behind radios
  • PL259 to SO239 Straight Adapter — in-line coupling between two UHF cable ends
  • SO239 to BNC Male Adapter — bridges UHF female jacks to BNC male equipment
  • SO239 to N Male Adapter — bridges UHF female jacks to N connector male equipment
  • SO239 Bulkhead Feedthrough Adapter — panel-mount connector for enclosures and radio housings
  • SO239 to SMA Flange-Mount Adapter — 4-hole panel mount for SMA circuit connections

Typical Applications

  • Ham radio and CB radio antenna connections
  • Adapting UHF-terminated coax to SMA-based handheld radios
  • Panel-mount and enclosure feedthrough wiring
  • RF test equipment and signal analyzers

Not sure which adapter you need? Match the connector type on each end of your existing cable or equipment port, and choose the adapter that bridges the two.