PL-259 UHF Male Plug to F Female Jack RF Adapter Barrel Connector

📋 Overview

This PL-259 UHF male plug to F female RF adapter lets you connect an SO-239 (UHF female) jack to an F-type male plug or coax cable end. It's a straight barrel-style adapter with a UHF male plug on one end and an F female jack on the other, so it joins two connectors that would otherwise never mate.

F-type connectors are the standard for video and television coax, so this adapter is a handy fit for TV antenna, satellite, cable, broadband and security camera setups where UHF-style gear needs to connect to F-type cabling.

⭐ Key Features & Benefits

• UHF Male to F Female — PL-259 (UHF male) plug on one end and F female jack on the other, so it connects an SO-239 female jack to an F male plug
• Bridges Two Connector Families — Lets UHF-style equipment and cabling work with the F-type coax used for TV, satellite, cable and video
• Compact Straight Barrel Design — Approximately 34.8 mm (1.37 inches) long, so it adds very little length to your cable run
• Threaded Connections — Both ends screw together for a secure fit that won't pop off, unlike push-on or bayonet styles
• Simple, Tool-Free Installation — Hand-tighten onto your connectors; no soldering, crimping or special tools required

📊 Specifications

📦 What's in the Box

• 1× PL-259 UHF Male Plug to F Female Jack RF Adapter Barrel Connector
• 📝 Note: The product photos may show two adapters for illustration purposes. One piece (1x) is included in the package.

📝 Note: Coax cables, plugs, antennas and equipment are not included. This adapter has a UHF male plug on one end and an F female jack on the other, so check that your two connectors are an SO-239 (UHF) female jack and an F male plug.

🔌 Compatible With

• SO-239 UHF female jacks
• F male plugs on RG6 and RG59 coax cables
• Equipment with a threaded F-type male connector that needs to connect to UHF (SO-239) equipment or cabling
• TV, satellite, cable and security camera coax runs that use F-type connectors

🎯 Common Applications

• Video Signal Transmission — Join coax cables and equipment in analog and digital video setups that use F-type connectors
• Cable & Satellite TV — Adapt connections to the F-type coax used by cable TV and satellite TV systems
• Over-the-Air TV Antennas — Connect to the F-type coax used by terrestrial digital TV antennas and receivers
• Cable Modems & Broadband Internet — F-type coax is also used for broadband internet connections
• Security & CCTV Cameras — Adapt cabling for camera systems that use F-type connectors on RG59 coax

🚀 Getting Started

Using the adapter takes about a minute and needs no tools:

1. Confirm that your connectors are an SO-239 (UHF) female jack and an F male plug.
2. Thread the PL-259 end of the adapter onto the SO-239 jack until it is snug.
3. Thread the F male plug onto the F female end of the adapter.
4. Tighten both connections by hand. Don't use pliers on the coupling nuts, which can damage the plating and threads.

💡 Tip: This adapter joins connectors but does not convert impedance. F-type video and TV equipment is typically 75 Ohm, while UHF-style radio equipment is typically 50 Ohm. Check the impedance of your equipment and cabling before connecting them.

Sold and supported by Envistia Mall. Ships from the USA. The manufacturer and Envistia LLC (dba Envistia Mall) are not responsible for any damages or losses resulting from the use of this product. Always follow proper electrical and RF safety practices. Specifications are based on manufacturer data and are subject to change without notice.